TECHNICAL DATA SHEEET OF METHYL ACETATE
 
Introduction：
    Methyl acetate is used primarily instead of acetone, methyl ethyl ketone, ethyl acetate, 
cyclopentaneand some other traditional solvents. In 2005, the united States, replace 
acetone solvent with methyl acetate. as a new type of organic solvent, Acetic acid methyl 
ester belongs to the organic solvents material which is not restrict using in the international, 
and it could reach the coatings, inks, resins, adhesives factory environmental standards, 
which belongs to the national industrial policy to encourage the development of green 
products.

 

No	Analysis Item	Specifications
1	Appearance	Tansparent liquid, no visible impurities
2	Methyl Acetate, %(m/m)≥	99.93
3	Methanol,%(m/m)≤	0.0030
4	Acidity(as acetic acid),%(m/m)≤	0.0005
6	Moisture,%(m/m)≤	0.0100
7	Density(20℃)(g/cm3)	0.920-0.935

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Characteristics and Applications:
1.Miscible with most organic solvents; Wide range of solvency; it can dissolve acrylic, vinyl, nitrocellulose, epoxy, polyurethane, polyester and phenolic resin.
2.Stable performance, volatile speed when leveling thinner, use does not cause in any proportion "burning rubber", "white" and so on, clients only need to adjust the solvent evaporation speed according to their own needs;
3. With a higher flash point and higher anti-white performance than acetone, it is better suited to craft paint and paint formulation.
4. Substitute for ethyl ester, acetone and butanone in needs of a low boiling point volatile organic solvent.
5.Substitute for cyclopentane and CFCs in polyurethane shoe material as green blowing agent .
6.environmentally friendly products, obtain SGS environmental certification, in line with the European ROHS directive, is an ideal solvents.
 
Applications:
Organic solvent for resin, coating, ink, paint, adhesive, leather, polyurethane foam blowing agent and thinner production.
 
Packaging and Transportation:
Liquid products . Transport  In a dry, and clean steel tank
 
Storage: 
products should be stored in a dangerous goods warehouse that is dry, well-ventilated, and low temperature. Avoid direct rays of sunlight, and cut off from heat source and kindling; summer seasons, when the outside temperature reaches above 28 ° c, should be refrigerated storage of Methyl acetate to prevent volatile